HRC Racing
HRC5836
Motor Heat Sink - with Fan - 1/8 motor 40-42mm - Freezer (L: 66mm)
HRC RACING products are known for its quality and performance. Each product match the high quality standards of HRC RACING. High precision and durability at lowest weight to offer the best performace to your R/C model.
This cooling device called Freezer is simply connected to the receiver of your model. It help to reduce heat to increase the performance and lifetime of your motor.
Can fit motors with 40-42mm diameter. Include quick installation guide for easy installation.
HRC5836:
Size: 54x59mm without fans, 61x66mm with fans mounted.
HRC5836s:
Size: 54x50mm without fan, 61x57mm with fans mounted. Suitable for motors with internal solder tags or short SC motors.
Optional parts HRC5836:
HRC5831J
| HRC28321-3 | Setup Tools |
| Spare parts - Buggy setup station - Gasket (1 pc) | |
| HRC28321-2 | Setup Tools |
| Spare parts - Buggy setup station - Connecting nut with screws (1 pc) | |
| HRC28321-1 | Setup Tools |
| Spare parts - Buggy setup station - wheel nuts (1 pc) | |
| HRC28325-2 | Setup Tools |
| Spare parts - Touring setup station - Connecting nut with screws (1 pc) | |
| HRC28325-1 | Setup Tools |
| Spare parts - Touring setup station - wheel nuts (1 pc) | |
| HRC08208X6 | Batteries |
| Battery - Li-Ion 2s - 7.4V 800mAh 15C - No Case - XT60 - 55 x 34 x 17mm | |
| HRC04457D | Batteries |
| Battery - LiPo 4S - 14.8V 5700mAh 100C - Hard Case Slim LCG- Ultra T - 138x47x37mm | |
| HRC01650T | Batteries |
| Battery - 6 cells - NiMH - 7.2V 5000mAh - Stick - TRX - 130x45x25mm | |
| HRC15-P997 | Bodies 1/10 |
| Spare Part - Neoxx V2 - Chasis side guard & body roof protector | |
| HRC15-P996 | Bodies 1/10 |
| Spare Part - Neoxx - Tail wing bracket connector - Artemix | |
| HRC68144HVBL-A9 | Servos |
| Servo Gear Set - for HRC68144HVBL - 9T 2021-2023 | |
| HRC28325 | Setup Tools |
| Tool - 1/10 - Setup Station Touring - with bag | |
| HRC28321 | Setup Tools |
| Tool - 1/10 - Setup Station Buggy - with bag | |
| HRC5902 | Setup Tools |
| Car Stand - Grip Pad self adhesive - 180x 93mm | |
The photos, descriptions, dimensions and prices of the products are for illustrative purposes only. They are subject to change at any time. We cannot accept any liability for technical or typographical errors.
