HRC Racing
HRC15-FSG4P-T
Transmitter - HRC NEOXX FS-G4P - Set TX + RX
The HRC NEOXX FS-G4P transmitter features all the important functions needed by hobby RC drivers and racers, the settings are easily editable via knobs behind the cover.
The NEOXX transmitter features a beginner mode, which allows the throttle to be limited at 50 % speed, even when pulling the throttle trigger to the maximum.
Specifications:
Channels: 4
Model type: car / boat
Wireless frequency: 2.4GHz
Transmission power: <20 dBm (e.i.r.p.) (EU)
Wireless protocol: 2A-BS
Range: > 300m (ground)
Channel resolution: 1024
Battery: 1.5AA * 4 / 6V
Low voltage alarm: < 4.2V
Antenna type: built-in single antenna
Temperature range: -10 °C ? + 60 °C
Humidity range: 20% - 95%
Dimensions: 160*193*97mm
Weight: 220g
Charging Port: FUT
Require 4 AA cell
Compatible receiver: HRC15-FSG4P-R
HRC28321-3 | Setup Tools |
Spare parts - Buggy setup station - Gasket (1 pc) | |
HRC28321-2 | Setup Tools |
Spare parts - Buggy setup station - Connecting nut with screws (1 pc) | |
HRC28321-1 | Setup Tools |
Spare parts - Buggy setup station - wheel nuts (1 pc) | |
HRC28325-2 | Setup Tools |
Spare parts - Touring setup station - Connecting nut with screws (1 pc) | |
HRC28325-1 | Setup Tools |
Spare parts - Touring setup station - wheel nuts (1 pc) | |
HRC08208X6 | Batteries |
Battery - Li-Ion 2s - 7.4V 800mAh 15C - No Case - XT60 - 55 x 34 x 17mm | |
HRC04457D | Batteries |
Battery - LiPo 4S - 14.8V 5700mAh 100C - Hard Case Slim LCG- Ultra T - 138x47x37mm | |
HRC01650T | Batteries |
Battery - 6 cells - NiMH - 7.2V 5000mAh - Stick - TRX - 130x45x25mm | |
HRC15-P997 | Bodies 1/10 |
Spare Part - Neoxx V2 - Chasis side guard & body roof protector | |
HRC15-P996 | Bodies 1/10 |
Spare Part - Neoxx - Tail wing bracket connector - Artemix | |
HRC68144HVBL-A9 | Servos |
Servo Gear Set - for HRC68144HVBL - 9T 2021-2023 | |
HRC28325 | Setup Tools |
Tool - 1/10 - Setup Station Touring - with bag | |
HRC28321 | Setup Tools |
Tool - 1/10 - Setup Station Buggy - with bag | |
HRC5902 | Setup Tools |
Car Stand - Grip Pad self adhesive - 180x 93mm |
The photos, descriptions, dimensions and prices of the products are for illustrative purposes only. They are subject to change at any time. We cannot accept any liability for technical or typographical errors.