HRC Racing
HRC15002BL-2
Car - 1/10 XL Electric - 4WD Buggy - RTR - HRC NEOXX - Brushless - Dirt Striker V2 BLUE/BLACK
The NEOXX V2 Dirt Striker by HRC RACING is a 4WD buggy in 1:10 XL scale.
The NEOXX V2 models from HRC RACING come equipped with large bumpers at the front and rear. With built-in LED lights located in both bumpers, night turns into day! The body is made from robust Lexan polycarbonate.
The model is splash-proof for fun in all weather conditions! The internal components are supported by a durable aluminum chassis plate.
Three adjustable oil-filled differentials ensure optimal power distribution between the front and rear axles for improved traction. The differential function allows you to adjust the handling to be either smoother or more aggressive, depending on your preference.
Sealed transmission components reduce the risk of damage from stones and prevent injury.
At the front axle, the driveshaft has been connected to a universal CVD driveshaft, allowing for more steering angle and reducing friction losses. Additionally, the driveshaft will no longer come loose during hard impacts.
Adjustable oil-filled shock absorbers provide good damping during jumps and in corners.
A side wall on the chassis plate helps to keep dirt out of the vehicle.
The model is equipped with energy-saving ball bearings. High-quality tires with strong traction provide excellent grip on any surface.
To ensure long life and high performance, the HRC NEOXX V2 models are built with electronic components from reputable brands. The high voltage and large capacity of the supplied batteries provide extended driving time, along with maximum acceleration and top speed.
The RTR (Ready to Run) complete set comes with the HRC RACING 2.4 GHz NEOXX FS-G4P transmitter. The transmitter features all necessary trim adjustments and has four channels. Optional accessories like LEDs or winches can be controlled via the available fourth channel.
The 220V fast charger allows for quick battery recharges.
The speed controller, batteries, and charger all come with new, precision-fitted XT60 high-performance connectors.
With the combination of the NEOXX FS-G4P transmitter and the HRC RACING ZTW BEAST G2 brushless speed controller, the driver can reduce the speed by 50% at the push of a button, making the model adaptable to the driver's skill level.
Additionally, the HRC ZTW BEAST G2 speed controller can be programmed using the optional ZTW1300011 programming card or via the Mobile App & ESC module ZTW2200011. This allows for fine adjustments, such as setting the brake force.
Spare parts are easily available from any good r/c model retailer. NEOXX and HRC RACING wish you lots of fun with your hobby!
NEOXX NEOXX Brushless V2:
1/10 XL wheelbase: 300mm
Total length: 460mm
Large XL bumpers front and rear
Body made from robust Lexan polycarbonate
LED lights front and rear
Motor power adjustable via the transmitter
Splash-proof onboard electronics
Three differentials (front, center, rear) for improved traction
Aluminum chassis plate
Adjustable oil-filled shock absorbers
Motor heatsink for improved heat dissipation
Aluminum shock tower (brushless version)
Low-friction ball bearings
2.4GHz NEOXX transmitter from HRC RACING
2.4GHz NEOXX receiver from HRC RACING
App programmable ZTW 60A speed controller (XT60 connectors)
HRC RACING 3660 motor 3300 KV
Splash-proof onboard electronics
HRC RACING 11.1V 3600 LiPo battery
HRC RACING balance fast charger
Maximum speed: 35-75 KM/H
High-quality universal driveshaft at the front
Required accessories:
4 AA batteries for the transmitter
Optional accessories:
Programming card for speed controller ZTW1300011
App module for speed controller ZTW2200011
Recommended price: 329.95 EUR
| HRC28321-3 | Setup Tools |
| Spare parts - Buggy setup station - Gasket (1 pc) | |
| HRC28321-2 | Setup Tools |
| Spare parts - Buggy setup station - Connecting nut with screws (1 pc) | |
| HRC28321-1 | Setup Tools |
| Spare parts - Buggy setup station - wheel nuts (1 pc) | |
| HRC28325-2 | Setup Tools |
| Spare parts - Touring setup station - Connecting nut with screws (1 pc) | |
| HRC28325-1 | Setup Tools |
| Spare parts - Touring setup station - wheel nuts (1 pc) | |
| HRC08208X6 | Batteries |
| Battery - Li-Ion 2s - 7.4V 800mAh 15C - No Case - XT60 - 55 x 34 x 17mm | |
| HRC04457D | Batteries |
| Battery - LiPo 4S - 14.8V 5700mAh 100C - Hard Case Slim LCG- Ultra T - 138x47x37mm | |
| HRC01650T | Batteries |
| Battery - 6 cells - NiMH - 7.2V 5000mAh - Stick - TRX - 130x45x25mm | |
| HRC15-P997 | Bodies 1/10 |
| Spare Part - Neoxx V2 - Chasis side guard & body roof protector | |
| HRC15-P996 | Bodies 1/10 |
| Spare Part - Neoxx - Tail wing bracket connector - Artemix | |
| HRC68144HVBL-A9 | Servos |
| Servo Gear Set - for HRC68144HVBL - 9T 2021-2023 | |
| HRC28325 | Setup Tools |
| Tool - 1/10 - Setup Station Touring - with bag | |
| HRC28321 | Setup Tools |
| Tool - 1/10 - Setup Station Buggy - with bag | |
| HRC5902 | Setup Tools |
| Car Stand - Grip Pad self adhesive - 180x 93mm | |
The photos, descriptions, dimensions and prices of the products are for illustrative purposes only. They are subject to change at any time. We cannot accept any liability for technical or typographical errors.
HRC Racing ...
... top products for every RC fan !
Copyrights © code & design: AdaptaWeb |
Copyrights © contents: HRC Distribution
Last update 21.11.2024