HRC Racing

HRC68501
Gyro - RC Car - Adjustable Gain by Transmitter
Especially designed for RC Drift Cars, Formula 1 and Pan Cars; works also very good in any RC Car.
Steering corrections and adjustments on your RC car:
The HRC68501 gyro allows you to drive your RC car more precisely, by making your car more manageable, more controllable and more stable.
Remote gain function:
The HRC68501 gyro allows you to adjust the gain from the 3rd channel of your transmitter using the remote gain function. Gain can also be adjusted directly with the trimmer on the gyro.
Ultra compact and lightweight device:
The HRC68501 gyro is ultra comptact (21x21x11mm) and lightweight (3.6g). It could be installed in any 1/18~1/5 RC Car.

HRC02275D | Batteries |
Battery - LiPo 2S - 7.4V 7500mAh 70C - RC Car - Hard Case - Ultra T 138.5mm*46.5*25 | |
HRC02275X9 | Batteries |
Battery - LiPo 2S - 7.4V 7500mAh 70C - RC Car - Hard Case - XT90AS 138.5mm*46.5*25 | |
HRC25293 | Bodies - Accessories |
Body Parts - 1/10 Accessory - Scale - Model car seat belt - black | |
HRC25292K | Bodies - Accessories |
Body Parts - 1/10 Accessory - Scale - Driver seat - black - 84x53x37mm | |
HRC25292R | Bodies - Accessories |
Body Parts - 1/10 Accessory - Scale - Driver seat - red - 84x53x37mm | |
HRC25291 | Bodies - Accessories |
Body Parts - 1/10 Accessory - Scale - Model car front pull rope | |
HRC08225X6 | Batteries |
Battery - LiOn 2S - 7.4V 2500mAh 12C - RC Tank - XT60 (F) 70*37*29mm | |
HRC08225T | Batteries |
Battery - LiOn 2S - 7.4V 2500mAh 12C - RC Tank - Tamiya (M) 70*37*29mm | |
HRC05421S | Batteries |
Battery - 4 cells - Receiver pack - 4.8V 2100mAh Ni-MH - AA square - JR 50x30x30mm | |
HRC05421F | Batteries |
Battery - 4 cells - Receiver pack - 4.8V 2100mAh NiMH - AA flat - JR Plug 52x58x10mm | |
HRC15-P946 | Cars parts |
Spare part - PB.Button Head Screw M3*14mm 10p | |
HRC15-P947 | Cars parts |
Spare part - KB.Flat Head Screw M3*8mm 6P | |
HRC15-P948 | Cars parts |
Spare part - KM.Flat Head Screw M3*10mm 6P | |
HRC5046C | Tools |
Hook and loop tape with eyelet - black with logo - 15x300mm |
The photos, descriptions, dimensions and prices of the products are for illustrative purposes only. They are subject to change at any time. We cannot accept any liability for technical or typographical errors.


