HRC Racing
HRC8791C
Engine Sound System Simulator Modul - SENSE ESS-One +
This is the newest sound system from HRC Racing. . The HRC Racing Ess-One + Engine Sound Simulator offers you a wide choice of sounds as well as the best sound quality available in the RC market. Select your indivual sound favorite for your RC model!
Features:
- Short-Circuit, overload, over-current and thermal protected
- Full RPM range linear sound synthesis
- Advanced NDS/DTS technology
- Intelligent state tracking compensation
-Simulates the sound of engine, starting, brakes, blow off valve, red line fuel cut, gear shifting
-More sound available from RC/Plus APP
-USB updatability
-Supply voltage range: 5Volts-26Volts
-Speaker Impedance: 4Ohms
-Output power under 4 Ohms: 20W/3S (12V)
-Number of audio channels: One Channel 30W max
Length: 8cm
Width: 5cm
Height: 8cm
HRC28321-3 | Setup Tools |
Spare parts - Buggy setup station - Gasket (1 pc) | |
HRC28321-2 | Setup Tools |
Spare parts - Buggy setup station - Connecting nut with screws (1 pc) | |
HRC28321-1 | Setup Tools |
Spare parts - Buggy setup station - wheel nuts (1 pc) | |
HRC28325-2 | Setup Tools |
Spare parts - Touring setup station - Connecting nut with screws (1 pc) | |
HRC28325-1 | Setup Tools |
Spare parts - Touring setup station - wheel nuts (1 pc) | |
HRC08208X6 | Batteries |
Battery - Li-Ion 2s - 7.4V 800mAh 15C - No Case - XT60 - 55 x 34 x 17mm | |
HRC04457D | Batteries |
Battery - LiPo 4S - 14.8V 5700mAh 100C - Hard Case Slim LCG- Ultra T - 138x47x37mm | |
HRC01650T | Batteries |
Battery - 6 cells - NiMH - 7.2V 5000mAh - Stick - TRX - 130x45x25mm | |
HRC15-P997 | Bodies 1/10 |
Spare Part - Neoxx V2 - Chasis side guard & body roof protector | |
HRC15-P996 | Bodies 1/10 |
Spare Part - Neoxx - Tail wing bracket connector - Artemix | |
HRC68144HVBL-A9 | Servos |
Servo Gear Set - for HRC68144HVBL - 9T 2021-2023 | |
HRC28325 | Setup Tools |
Tool - 1/10 - Setup Station Touring - with bag | |
HRC28321 | Setup Tools |
Tool - 1/10 - Setup Station Buggy - with bag | |
HRC5902 | Setup Tools |
Car Stand - Grip Pad self adhesive - 180x 93mm |
The photos, descriptions, dimensions and prices of the products are for illustrative purposes only. They are subject to change at any time. We cannot accept any liability for technical or typographical errors.